Filter
Top Products
H3119 Electric
3
⁄16" Crown Stapler
-3-
INTRODUCTION
Commentary
We are pleased to provide this manual with
the Model H3119. It was written to encour-
age safety considerations and guide you
through general operating procedures and
maintenance. This manual represents our
effort to produce the best documentation
possible.
The specifications, details, and pho-
tographs in this manual represent the
Model H3119 as supplied when the manu-
al was prepared. However, owing to
Grizzly’s policy of continuous improve-
ment, changes may be made at any time
with no obligation on the part of Grizzly. If
you have any comments regarding this
manual, please write to us at the address
below:
Grizzly Industrial, Inc.
C
/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H3119 Electric
3
⁄16" Crown Stapler. This
model is part of a growing Grizzly family of
fine power tools. When used according to
the guidelines set forth in this manual, you
can expect years of trouble-free, enjoy-
able operation and proof of Grizzly’s com-
mitment to customer satisfaction.
The Model H3119 is a high powered elec-
tric stapler capable of firing 20 gauge,
3
⁄16"
crown staples in lengths ranging from
1
⁄4"
to
9
⁄16". The quick loading magazine holds
85 staples and the weight is 3.25 lbs.
The Model H3119 is best suited for instal-
lation of carpet, insulation, ceiling tiles,
cabinets and HVAC systems.
Lack of familiarity with this manual
could cause serious personal injury.
Spend a sufficient amount of time
becoming familiar the contents of
this manual, including all the safety
warnings.