Grizzly H3272 Air Compressor User Manual


 
1. READ THIS ENTIRE MANUAL
BEFORE OPERATING THE
COMPRESSOR.
2. OPERATE THE COMPRESSOR IN A
WELL VENTILATED AREA.
3. NEVER AIM THE AIR NOZZLE
DIRECTLY AT YOURSELF OR OTH-
ERS.
4. DO NOT USE THE COMPRESSOR
FOR FILLING BREATHING OR DIV-
ING APPARATUS.
5. ALWAYS WEAR SAFETY GLASS-
ES WHEN OPERATING THIS
MACHINE.
6. DO NOT USE A TOOL THAT
REQUIRES MORE THAN THE COM-
PRESSORS CFM AND PSI RATING.
Safety
This
1
8 HP Mini Air Compressor is ideal for
most air brush sets. Portable design fea-
tures automatic shut-off at 38 PSI, a mois-
ture trap, an air brush holder and a coiled
air hose. CFM at maximum PSI is 0.48 and
the total weight is 7 lbs.
Introduction
The Model H3272 Mini Air Compressor is
wired for 110V, single-phase operation
only.
To operate the mini air compressor:
1. Make sure the compressor is discon-
nected from the power source.
2. Connect your coiled air hose to the
1
4"
NPT connector on the air filter. Note—
Use teflon tape on the treads of the fit-
tings.
3. Connect the air brush or other air tools
to the compressor.
4. Plug the compressor in and press the
switch to start it.
5. Disconnect the air tool and unplug the
compressor when not in use.
Operations
Regular periodic maintenance on your
air compressor will ensure its optimum
performance. Make a habit of inspect-
ing your compressor each time you use
it. Check the following items:
Clean off the cylinder head.
Check for worn or damaged cords and
plugs.
Check for any other condition that could
hamper the safe operation of this
machine.
Check for loose bolts or fittings.
Check air lines and connectors to make
sure they are in good condition.
Drain the moisture trap periodically.
Maintenance
Set Up
The Model H3272 was shipped in a care-
fully packed box. Inspect the machine for
damages due to shipping. If you have con-
cerns please contact us. Contact informa-
tion is on the back page.
Place the Model H3272 on a flat surface in
a well ventilated, dry area where tempera-
tures will not exceed 90˚F.
The Model H3272 is an oilless compres-
sor. DO NOT ADD OIL.
Always wear safety glasses and use
extreme caution when working
around compressed air.
Always unplug compressor when
performing maintenance or chang-
ing air tools.
Model H3272 Mini Air Compressor
Ref# Part# Description
101 PH3272101 Motor
102 PH3272102 Front Case
103 PH3272103 Front Cover
104 PH3272104 Capacitor/On/Off Switch
105 PH3272105 Piston Rod
106 PH3272106 Ball Bearing
107 PH3272107 Crankshaft
108 PSB10M Cap Screw M5-.8 x 15
109 PH3272109 Inlet & Exhaust Plate
110 PSB57M Cap Screw M3-.5 X 6
111 PH3272111 Cylinder
112 PH3272112 Compression Ring
113 PH3272113 Collar
114 PH3272114 Cylinder Base
115 PH3272115 O-Ring
116 PH3272116 Valve Plate Set
117 PH3272117 O-Ring
Ref# Part # Description
118 PH3272118 Cylinder Head
119 PH3272119 Release Valve
121 PN02M Hex Nut M10-1.5.
122 PH3272122 Handle
123 PH3272123 Handle Screw
124 PH3272124 Connector
125 PH3272125 Water Filter
126 PH3272126 Connector
127 PH3272127 Air Hose Nut
128 PH3272128 Air Hose
129 PH3272129 Air Hose Nut
130 PH3272130 Connector
1
4 NPT
131 PH3272131 Elbow
132 PH3272132 Pressure Switch
133 PS09M Phlp Hd Scr M5-.8 X 10
134 PS77M Php Hd Scr M5-.8 x 140
135 PS78M Phl Hd Scr M4-.7 x 45