Grizzly H5627 Staple Gun User Manual


 
H5626/H5627 Upholstery Stapler
-6-
OPERATION
Loading Stapler
To load your stapler:
1. Disconnect the air supply from the
stapler!
2. Push the magazine latch in the direc-
tion shown in Figure 2.
Figure 2. Releasing magazine latch. Figure 3. Loading staples into stapler.
5. Push the magazine cover forward
until the magazine latch locks in
place.
3. Pull back the magazine cover until it
stops.
4. Point the stapler up and insert a stick
of staples into the magazine as shown
in Figure 3. Make sure that the point-
ed ends of the staples point in the
same direction as the stapler nose
piece.