Filter
Top Products
Read the manual before operation.
Become familiar with this tool, its
safety instructions, and its operation
before beginning any work. Serious
personal injury may result if safety
or operational information is not
understood or followed.
To use the paint tank:
1. Figure 6
Figure 5
2.
3.
4.
Figure 4
5.
6.
7.
8.
This paint tank is not designed for
use with highly abrasive, corrosive,
or rust inducing materials. If such
materials are used, frequently and
thoroughly clean all components to
reduce the need to replace parts.
NOTICE
Figure 5.
Air
Compressor
Gun air supply
ON/OFF valve.
Gun regulator setting
as specified by gun
manufacturer. Typically
never exceed 60 PSI Max.
Paint supply
ON/OFF
valve
Water
separator.
120 PSI Max.
120 PSI Max.
10 to 45 PSI Max.
Tank regulator
setting is typically
10 PSI. NEVER
exceed 45 PSI Max.
120 PSI Max.
Tank air
supply
ON/OFF
valve.
EXPLOSION HAZARD!
Never exceed 45 PSI when pres-
surizing the tank.
Operation