Filter
Top Products
H6330 PAINT TANK
&
'
(
)
*
+
,
-
.
&%
&&
&'
&(
&)
&*
&+
&,
&-
&.
'%
'&
''
'(
)
)
READ and UNDERSTAND
instruction manual to
avoid serious injury. If a
manual is not available,
DO NOT use machine. Go
to www.grizzly.com or
call (800) 523-4777.
WARNING!
WARNING!
EYE/LUNG INJURY
HAZARD!
Always wear safety
glasses and a
respirator when using
this equipment.
H6330 2
1
⁄
4
GAL. PAINT TANK
TO REDUCE RISK OF SERIOUS INJURY
WHEN USING THIS EQUIPMENT:
1. Do not exceed 50 PSI.
2. Do not use attachments with lower pressure
ratings than the adjusted tank pressure.
3. Do not modify tank or substitute inferior
components.
4. Do not tamper with safety valve.
5. Do not remove lid while tank is under
pressure. Always turn off air pressure at the
source and release air pressure from the tank
before removing the lid.
6. Do not use reactive chemicals in the tank
such as acids, caustic solutions or
halogenated hydrocarbon solvents. Damage
to the gasket and safety valve seal could
occur.
7. Do not overtighten clamps. Use only hand
pressure to tighten clamps.
Capacity: 2 ⁄ Gallons
Gun Type: Pressure Feed (HVLP or
Conventional)
Maximum Pressure: 50 PSI
Operating Pressure: 25–30 PSI
Tank Construction: Galvanized Steel
Weight: 21 lbs.
Max. Pressure: 50 PSI
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PH8225018 TANK SHELL ASSEMBLY 13 PH8225006 WING SCREW M10-1.5 X 40
2 PH8225017 LID GASKET 14 PH8225005 LID CLAMP
3 PH8225016 LID ASSEMBLY 15 PH8225004 COTTER PIN 2 X 30
4 PH8225015 ADAPTER 16 PH8225003 CLEVIS PIN 3/8 X 1-1/4
5 PH8225014 GAUGE 17 PH8225002 FLUID TUBE
6 PH8225013 REGULATOR 18 PH8225001 FLUID OUTLET ADAPTER
7 PH8225012 SWIVEL ADAPTOR 19 PH6330019 MACHINE ID LABEL FOR H6330
8 PH8225011 T-BRANCH 20 PLABEL-12A READ MANUAL LABEL-VERT.
9 PH8225010 SAFETY VALVE 21 PLABEL-37 RESPIRATOR/GLASSES LABEL
10 PH8225009 HANDLE M8-1.25 22 PH8225026 MAXIMUM PRESSURE LABEL
11 PN03M HEX NUT M8-1.25 23 PH8225027 DEPRESSURIZE LABEL
12 PH8225007 FLUID OUTLET