Filter
Top Products
Model H7673 HVLP Spray Gun -7-
SECTION 2: INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7673 HVLP Spray Gun. This model is
part of a growing Grizzly family of fine
tools. When used according to the guide-
lines set forth in this manual, you can
expect years of trouble-free, enjoyable
operation, and proof of Grizzly’s commit-
ment to customer satisfaction.
The Model H7673 is designed to be used
for smaller jobs where large volumes
of material are not needed. The Model
H7673 features HVLP technology, which
has greater transfer efficiency than suction
feed spray guns and reduces overspray,
saving on material costs.
It is our pleasure to provide this manual
with the Model H7673. It was written
to encourage safety considerations and
guide you through general operating pro-
cedures and maintenance.
The specifications, details, and photo-
graphs in this manual represent the Model
H7673 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Read the manual before operation.
Become familiar with this spray gun,
its safety instructions, and its opera-
tion before beginning any work.
Serious personal injury may result if
safety or operational information is
not understood or followed.
Foreword Contact Info
Tool Data
Type ............................. HVLP Gravity Feed
Fluid Tip .......................................... 0.8 mm
Air Consumption ...............................6 CFM
Inlet Air Pressure ........3-4 Bar /43.5-58 PSI
Fluid Pressure ............................... >10 PSI
Maximum Pattern Width ................ 190 mm
Material Capacity .................100 ml / 4 fl oz