Filter
Top Products
H7945/H7946/H7995 26° Angle Nailer
-4-
INTRODUCTION
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
H7945/H7946/H7995 26° Angle Nailer.
This nailer is part of a growing Grizzly
family of fine pneumatic tools. When used
according to the guidelines in this manual,
you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s
commitment to customer satisfaction.
The specifications and photographs in this
manual represent Models H7945/H7946/
H7995 as supplied when this manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword
Contact Info
Nail Type ......................... 18 Gauge @ 26°
Nail Length .......................................
7
/8"–2"
Magazine Capacity ......................128 Nails
Weight .............................................3.0 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI
Model H7945
Specifications
Model H7995
Specifications
Nail Type ......................... 15 Gauge @ 26°
Nail Length .......................................
7
/8"–2"
Magazine Capacity ........................86 Nails
Weight .............................................3.0 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI
Model H7946
Specifications
Nail Type ......................... 16 Gauge @ 26°
Nail Length .......................................
7
/8"–2"
Magazine Capacity ......................100 Nails
Weight .............................................3.0 lbs.
Air Inlet ..........................................
1
/4" NPT.
Operating Pressure ................. 70–110 PSI