Operations
To use the drill press lathe attachment:
1.
2.
3.
5.
6.
7.
8.
9.
10.
Figure 6
Feeding the tip of the chisel into the work-
piece at to sharp of an angle will cause the
chisel to dig into the workpiece, which may
eject the chisel or workpiece and cause
severe injury. Always keep the chisel perpen-
dicular to the workpiece so it drags across
the workpiece rather than digging in.
Figure 7.
Unsafe
Area
Rotation
Direction
Safest
Area
11.
12.
Figure 7
Figure 6.