Filter
Top Products
Model H8116 Spray Gun-10-
SECTION 4: OPERATIONS
Spraying
The Model H8116 spray gun is designed
to spray paints and lacquers that have low
viscosity or have been thinned down. It is
ideal for touch-up projects.
To use your spray gun:
1. Read and follow the material manufac-
turer's instructions for spraying, mixing,
safety, disposal, and any other instruc-
tion on the label or Material Safety Data
Sheet (MSDS).
2. Ensure the cup is securely tightened to
the gun and all other fittings are secure
to avoid air leaks or material spills.
3. To start, set the inlet air pressure (the
air coming to the spray gun) to the
lowest pressure recommended in Tool
Data on Page 7 or to the material man-
ufacturer's recommendations. You can
then adjust as necessary from there.
4. Fill the cup with material.
5. Trial and error are necessary to achieve
the results you want along with a fair
amount of practice. Test your spray
pattern on a piece of cardboard or
scrap material that is similar to your
project surface.
EXPLOSION HAZARD! DO NOT
smoke or have any source of flame
or spark near spraying. Vapors will
explode if ignited.
RESPIRATORY HAZARD! Always use
respirator rated for organic vapor
and solvent use when using spray
equipment. Failure to protect your
lungs can lead to respiratory illness
and nervous system damage.
TOXIC FUMES! Always use an
approved spray booth or well ven-
tilated area when spraying. NEVER
spray in a confined space where
toxic fumes and flammable vapors
can accumulate to deadly levels.