Filter
Top Products
Changing Nozzles
To change the glue gun nozzle:
1.
2.
3.
Note: Never pull the glue stick out through
the back of the gun or it may damage the
feed mechanism.
4.
Temperature Adjustment
To adjust the glue gun temperature:
1.
Figure 7
Figure 7.
Note: The screwdriver can be stored in the
base of the glue gun for quick future use.
Fluid Output Adjustment
Figure
6
Figure 6.
If you need help with your new pneumatic tool, call
our Tech Support at: (570) 546-9663.
NOTICE
Some materials are heat sensitive and may
become damaged either by the heated noz-
zle or the glue. Test the temperature setting
on a scrap piece of material.