Filter
Top Products
Model H8211 Die Grinder Kit -3-
INTRODUCTION
H8211 Inventory Qty
A. Case....................................................1
B.
1
/4" Mini Die Grinder............................1
C. Grinding Stones................................10
D.
1
/4" NPT Male Air Fitting......................1
E.
1
/8" Collet.............................................1
F. Wrenches............................................2
Collet Size....
..............................
1
⁄8" and
1
⁄4"
No Load Speed.......................22,000 RPM
Air Consumption...............................4 CFM
Air Inlet.....................................................
1
⁄4"
Required PSI.....................................90 PSI
Maximum Sound Level...................93.8 dB
Specifications
Foreword
The specifications, details, and photo-
graphs in this manual represent the Model
H8211 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
If you have any comments regarding this
manual, please write to us at the following
address:
Grizzly Industrial, Inc.
C/O Technical Documentation
P.O. Box 2069
Bellingham, WA 98227-2069
E-Mail: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
Figure 1. Model H8211 Inventory.
A
D
C
B
E
F
Inventory