Assembly
Figure 1Parts
Breakdown Page 3
Tools Needed Qty
To assemble your overarm blade guard:
1.
2.
Note: Choose one of the three height mount-
ing positions for the side support legs that will
best fit the height of your table saw.
3.
4.
Note: The adjustable threaded feet can also
be used to vary the height of the blade guard
over the table saw.
5.
6.
7.
Note: The blade guard assembly rotates on
the boom assembly to make further adjust-
ments to the blade guard height above the
blade.
8.
9.
To avoid the risk of the blade guard coming
in contact with the saw blade during opera-
tion, always securely attach the blade guard
assembly to the table saw and properly posi-
tion the guard above the blade. Otherwise,
the blade guard could break apart and cause
serious personal injury or property dam-
age.
10.
11.
12.
Boom Rotation