Filter
Top Products
T20644 34° Angle Finish Nailer–2½"
-6-
INTRODUCTION
If you have any comments regarding this
manual, please contact us:
Grizzly Industrial, Inc.
C/O Technical Documentation Manager
P.O. Box 2069
Bellingham, WA 98227-2069
Email: manuals@grizzly.com
Most importantly, we stand behind our
tools. If you have any service questions or
parts requests, please call or write us at
the location listed below.
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Muncy, PA 17756
Phone: (570) 546-9663
Fax: (800) 438-5901
E-Mail: techsupport@grizzly.com
Web Site: http://www.grizzly.com
We are proud to offer the Grizzly Model
T20644 34º Angle Finish Nailer–2½". This
model is part of a growing Grizzly family of
fine pneumatic tools. When used accord-
ing to the guidelines set forth in this man-
ual, you can expect years of trouble-free,
enjoyable operation and proof of Grizzly’s
commitment to customer satisfaction.
The specifications, details, and photo-
graphs in this manual represent the Model
T20644 as supplied when the manual was
prepared. However, owing to Grizzly’s pol-
icy of continuous improvement, changes
may be made at any time with no obliga-
tion on the part of Grizzly.
Foreword Contact Info
Nailer Specifications
Nail Size .....................15 gauge finish nails
Nail Length ....................................1¼"-2½"
Magazine Capacity ................................. 80
Air Inlet ...........................................¼" NPT
Weight ................................................5 lbs.
Operating Pressure .................. 60-100 PSI
Max Operating Pressure ................ 120 PSI
Functional Description
The Model T20644 is designed to toenail
into corners and shoot at any angle. This
nailer is ideal for door, window, exterior,
and decorative trim, cabinet work, and fin-
ish paneling. The Model T20644 features
a 360° exhaust port, comfort grip rubber
handle, economical air consumption with
low noise, narrow nose for tight spots, and
quick jam release mechanism.