Grizzly T21319 Sander User Manual


 
4.        
Figure 5
Basic Bending Operations
1. 

2.       
         
      
Clamp Adjustment
3. 
  

Clamp Adjustment
1. 
      
    
     

Figure 5.
T21319 Breakdown and Parts List
PINCH
HAZARD!
Keep hands away
from clamp area
when clamping or
bending.
EYE INJURY
HAZARD!
Always wear safety
glasses when using
this machine.
MODEL H2788
24" BENDING BRAKE
Specifications
Max. Workpiece Thickness: 18 Ga.
Max. Bend: 145°
Max. Workpiece Width: 27-1/2"
Weight: 60 lbs.
To reduce the risk of serious personal injury when using this
machine:
1. Read and understand the manual before starting.
2. Always wear eye protection.
3. Wear heavy leather gloves when handling sheet metal.
4. Do not exceed the rated capacity of this machine.
5. Do not use a breaker bar to gain leverage.
6. Always firmly clamp workpiece before bending.
1
3
7
5
2
6
5
10
11
3
8
4
14
13
15
16
21
22
23
24
17
18
20
19
REF PART # DESCRIPTION REF PART # DESCRIPTION
1 PT21319001 CLAMP 14 PT21319014 FLANGE BEARING
2 PSS39M SET SCREW M10-1.5 X 50 15 PT21319015 BASE
3 PN05M HEX NUT M16-1.5 16 PT21319016 BREAKER BAR
4 PB01M HEX BOLT M10-1.5 X 30 17 PT21319017 THREADED LEVER M20-1.75
5 PN02M HEX NUT M10-1.5 18 PT21319018 BREAKER ANGLE
6 PLW06M LOCK WASHER 10MM 19 PB03M HEX BOLT M8-1.25 X 16
7 PT21319007 COLLAR 20 PW01M FLAT WASHER 8MM
8 PT21319008 SPECIAL SET SCREW M10-1.5 X 90 21 PT21319021 PINCH HAZARD WARNING
10 PT21319010 CLAMPING ANGLE 22 PT21319022 MACHINE ID LABEL
11 PT21319011 CLAMP MOUNTING PLATE 23 PLABEL-11D SAFETY GLASSES LABEL
13 PT21319013 PIVOT PIN 16 X 50 24 PPAINT-1 GREEN TOUCH-UP PAINT
Figure 4.


The bending brake MUST be clamped or
secured to a workbench before being used.
Failure to do so can lead to personal injury
or machine damage!