Test Run &
Break In
To test run and break in the air com-
pressor:
1.
2. ON/OFF
OFF
Figure 4
6.
Figure 6
OFF
Note If the compressor reaches 115-
120 PSI, and does not automatically
shut OFF, lift the ON/OFF lever up to
shut the motor OFF before the pressure
climbs any higher. Adjust the pressure
switch as outlined on Page 20.
3.
4.
5. Figure 5
ON
Figure4
Figure 5.
Figure 6.
7.
Pressure Relief Valve Test Page
14
8.
Changing OilPage 18