Filter
Top Products
-2-
T26900 10-Drawer Tool Chest (Mfd. 08/14)
To remove and install drawers:
1. Open top.
2. Fully extend drawer and remove contents.
3. Push left locking tab down and hold, then pull
right locking tab up and hold (see Figure 3).
The drawers can be removed and re-installed if
an object inside causes them to not close fully.
Removing & Installing Drawers
Figure 3. Location of drawer locking tabs.
Left Locking Tab
Right Locking Tab
4. Pull drawer out.
5. Apply a thin layer of dry lubricant to drawer
slides.
6. To re-install, insert drawer runners into slides
and push drawer in until it stops. The lock-
ing tabs will automatically snap into place to
secure the drawer in the slides.
Maintenance
• Use soft, clean cloth, and standard cleaning
solution to remove grease, dirt, or oil. Do not
use solvents or flammable cleaning liquids.
• Lubricate drawer slides as needed with dry
lubricant.
• Use graphite to lubricate lock annually.