Filter
Top Products
Page 2SKU 03418 For technical questions, please call 1-800-444-3353.
Specifications
rewoPtupnIspmA2.2,zH06,CAV021sdaeLyrettaBGWA61xgnoL”7’6
rewoPtuptuO
spmA*01-CDstloV21
spmA*2-CDstloV21
spmA*
01-CDstloV6
spmA55-tratSenignE
droCrewoP
GWA81x”5’6
)gulPdednuorGgnorP-3(
thgieW.sbL01
*Amperage is only present when the unit is connected to a battery or in START mode.
Save This Manual
You will need the manual for the safety warnings and precautions, assembly instructions,
operating and maintenance procedures, parts list and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep the manual and
invoice in a safe and dry place for future reference.
Basic Safety Warnings and Precautions
WARNING: When using Charger, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this Charger!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use Charger in damp or wet locations. Don’t
expose to rain. Keep work area well lighted. Do not use Charger in the presence of
flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle the Charger.
4. Store idle equipment. When not in use, Charger must be stored in a dry location to
inhibit rust. Always lock up Charger and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small Charger to do the work
of a larger industrial Charger. There are certain applications for which this Charger
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this Charger and do not use this Charger for a purpose for
which it was not intended.
6. Dress properly. Do not wear loose clothing or jewelry as they can be caught in
moving parts. Protective, electrically nonconductive clothes and nonskid footwear are
recommended when working. Wear restrictive hair covering to contain long hair.
7. Use eye protection. Always wear ANSI approved impact safety goggles.
8. Do not overreach. Keep proper footing and balance at all times. Do not reach over or
across running machines.
9. Maintain Charger with care. Keep Charger clean for better and safer performance.
Inspect tool cords periodically, and if damaged, have them repaired by a qualified
technician. The clamps must be kept clean, dry, and free from oil and grease at all
times.
REV 12/05