Filter
Top Products
SKU 31810 For technical questions, please call 1-800-444-3353. Page 3
Do not expose power tools to rain 4.
or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
Do not abuse the Power Cord.5.
Never use the Power Cord to carry
the tools or pull the Plug from an
outlet. Keep the Power Cord away
from heat, oil, sharp edges, or
moving parts. Replace damaged
Power Cords immediately. Dam-
aged Power Cords increase the risk
of electric shock.
When operating a power tool out-6.
side, use an outdoor extension
cord marked “W-A” or “W”. These
extension cords are rated for outdoor
use, and reduce the risk of electric
shock.
PERSONAL SAFETY
Stay alert. Watch what you are do-1.
ing, and use common sense when
operating a power tool. Do not use
a power tool while tired or under
the inuence of drugs, alcohol, or
medication. A moment of inatten-
tion while operating power tools may
result in serious personal injury.
Dress properly. Do not wear loose 2.
clothing or jewelry. Contain long
hair. Keep your hair, clothing, and
gloves away from moving parts.
Loose clothes, jewelry, or long hair
can be caught in moving parts.
Avoid accidental starting.3. Be sure
the Power Switch is off before
plugging in. Carrying power tools
with your nger on the Power Switch,
or plugging in power tools with the
Power Switch on, invites accidents.
Remove adjusting keys or wrench-4.
es before turning the power tool
on. A wrench or a key that is left at-
tached to a rotating part of the power
tool may result in personal injury.
Do not overreach. Keep proper 5.
footing and balance at all times.
Proper footing and balance enables
better control of the power tool in
unexpected situations.
Use safety equipment. Always 6.
wear eye protection. Dust mask,
nonskid safety shoes, hard hat, or
hearing protection must be used for
appropriate conditions.
TOOL USE AND CARE
Use clamps (not included) or other 1.
practical ways to secure and sup-
port the workpiece to a stable
platform. Holding the work by hand
or against your body is unstable and
may lead to loss of control.
Do not force the tool. Use the cor-2.
rect tool for your application. The
correct tool will do the job better and
safer at the rate for which it is de-
signed.
Do not use the power tool if the 3.
Power Switch does not turn it on
or off. Any tool that cannot be con-
trolled with the Power Switch is dan-
gerous and must be replaced.
Disconnect the Power Cord Plug 4.
from the power source before
making any adjustments, changing
accessories, or storing the tool.
Such preventive safety measures
reduce the risk of starting the tool ac-
cidentally.