Filter
Top Products
SKU 40315 For technical questions, please call 1-800-444-3353. Page 2
PRODUCT SPECIFICATIONS
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram.
Keep your invoice with this manual. Write the invoice number on the inside of the front
cover. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
SAVE THESE INSTRUCTIONS
WORK AREA
1. Keep your work area clean and well lit. Cluttered benches and dark areas
invite accidents.
2. Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
Item Description
Electrical Requirements 120VAC / 60Hz / 4.8 Start Up Amps
3565 RPM
Power Cord Plug Type: 3 Prong, Grounded
Power Cord Length: 7 Feet
Cutting Wheel Size/Type 7” Diameter / Rated 8500 RPM / Wet Diamond Bonded
Cutting Wheel RPM Rating Minimum 3600 RPM
Material Cutting Capacity Maximum 12” Wide x 1” High
Rotating Angle of Table
0°-45° in 1° Increments
Table Dimensions 15-3/4” x 16-1/2” x 7-13/16”
Accessories Diagonal Cutting Fixture / Plastic Tub / 7” Cutting Wheel
Unit Weight 32.5 Pounds
235591
REV 02/07