Filter
Top Products
Page 2SKU 41921
For technical questions, please call 1-800-444-3353.
SPECIFICATIONS
Motor 115 V/60 Hz. 2.2 HP
Amps 7.1 (no load)
Cuts per Minute 16,000
Cutter Head RPM’s 8,000 (no load)
Cutting Knives 2, Bi-Metal, M-2 edge
Feed Rate 23 feet per minute
Table Dimension 12-5/8”L x 10-1/4”W
Sound Level 94 dB
Power Cord 5’9”, 3-pole, UL listed
Overall Dimensions 22” x 16” x 23-1/4”
Weight 89.5 lb.
Cutting Capacity
Length of unbutted stock 8” minimum
Width of stock 10” max.
Thickness of stock 1/4” - 5”
Depth of cut 1/8” max.
Included Accessories
Combination wrench
2 hex wrenches
Carbon Brush set
Blade / Knife Gauge
Features
Adjustable extensions to support long workpieces.
Anti-kickback safety devices prevent workpieces from being ejected toward the operator.
Two bi-metallic blades are adjustable and replaceable for powerful cutting performance.
Compact and lightweight machine can plane workpieces up to 10” wide and 5” thick.
Positive adjusting table with crank handle and easy to read thickness gauge.
ON/OFF switch has removable safety lock device to prevent unauthorized use of the machine.
Integral circuit breaker protects the motor from burn out.
Save this manual
You will need the manual for the safety warnings and cautions, assembly instructions, operating
procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your invoice with this
manual. Write the invoice number on the inside of the front cover. Keep both this manual and your invoice
in a safe, dry place for future reference.
NOTICE
The Warnings, Cautions, and Instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be
understood by the operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the operator.
SAFETY WARNING & CAUTIONS
READ ALL INSTRUCTIONS BEFORE USING THIS TOOL!
Warning! Make sure blade is fastened and tightened down securely.
1.
2.
3.
4.
5.
6.
7.
1.