Filter
Top Products
SKU 46237 For technical questions, please call 1-800-444-3353. Page 13
Rotate the wheel 45 degrees and c.
repeat the test until the entire wheel
has been checked.
An undamaged wheel will give a d.
clear tone. If cracked, there will be a
dead sound and not a clear ring.
Slip the grinding wheel onto the Spin-5.
dle with a paper gasket, or blotter,
on the grinding wheel and the wheel
Inner Flange.
WARNING: To prevent serious
injury, blotters must be used for all
grinding wheels they are provided
with. Blotters help prevent grind-
ing wheel damage and wheel slip-
page, causes of wheel failure.
Thread the Outer Flange onto the 6.
Spindle. Wrench tighten only enough
so that the wheel is securely held on
the spindle.
WARNING: To prevent serious
injury, do not overtighten ange.
Overtightening can damage the
wheel, causing wheel failure.
Guard Adjustment
Adjust the Wheel Guard so that it 7.
provides a shield between the user
and the wheel.
8.
Guard in place, reposition the Guard
as needed to provide protection from
the wheel, and tighten the Nut again.
Do not remove the guard.
Work Piece and Work Area Set Up
Designate a work area that is clean 1.
and well-lit. The work area must not
allow access by children or pets to
prevent injury and distraction.
Route the power cord along a safe 2.
route to reach the work area without
creating a tripping hazard or exposing
the power cord to possible damage.
The power cord must reach the work
area with enough extra length to al-
low free movement while working.
Secure loose work pieces using a 3.
vise or clamps (not included) to pre-
vent movement while working.
There must not be hazardous ob-4.
jects, such as utility lines or foreign
objects, nearby that will present a
hazard while working.
You must use personal safety equip-5.
ment including, but not limited to,
ANSI-approved eye and hearing pro-
tection, as well as heavy work gloves.
Before beginning work, provide for 6.
work surface.