Harbor Freight Tools 47991 Drill User Manual


 
Page 6SKU 47991
For technical questions, please call 1-800-444-3353.
Maintenance
Unplug the drill while performing maintenance.
Periodically check the mounting screws and tighten if necessary.
Clean the unit with a damp cloth. Never use solvents to clean the unit.
Inspect the chuck and remove any dirt or debris.
Inspect the Carbon Brushes (#29). See FIGURE 1 on page 4.
Remove the Carbon Brush Cap (#30) on top of the drill.
Take the Carbon Brush (#29) out of the Brush Holder (#28). If it is dirty, use a pencil
eraser to clean it. If it is worn, replace it and replace the Carbon Brush Cap (#30).
If you replace one Carbon Brush, you must replace them both. Repeat the process
with the Carbon Brush Cap (#30) on the bottom of the drill.
LIMITED 90 DAY WARRANTY
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality
and durability standards, and warrants to the original purchaser that this product is free from
defects in materials and workmanship for the period of 90 days from the date of purchase. This
warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or
accidents, repairs or alterations outside our facilities, criminal activity, improper installation,
normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, in-
juries to persons or property, or for incidental, contingent, special or consequential damages
arising from the use of our product. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation of exclusion may not apply to
you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with
transportation charges prepaid. Proof of purchase date and an explanation of the complaint
must accompany the merchandise. If our inspection verifies the defect, we will either repair or
replace the product at our election or we may elect to refund the purchase price if we cannot
readily and quickly provide you with a replacement. We will return repaired products at our
expense, but if we determine there is no defect, or that the defect resulted from causes not
within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state.
3491 Mission Oaks Blvd. • PO Box 6009 • Camarillo, CA 93011 • (800) 444-3353
1.
2.
3.
4.
REV 07d