Harbor Freight Tools 66783 Battery Charger User Manual


 
Page 7For technical questions, please call 1-800-444-3353.SKU 66783
5. Always unplug the Battery Charger from its electrical outlet before
connecting its cables to a battery, or performing and inspection,
maintenance, or cleaning procedures.
Keep extension cord off wet ground and away from water.6.
Use this Battery Charger with lead/acid batteries only. When charging a 7.
maintenance-free battery, always monitor the progress of the charge by viewing
the ammeter. Do not over charge a maintenance-free battery.
Do not attempt to charge non-rechargeable or defective batteries.8.
Keep connections and cable clamps clean and free from corrosion.9.
Never simultaneously charge several batteries.10.
Do not discard used batteries in the trash. Properly recycle according to local 11.
environmental codes.
WARNING:12. This product contains or, when used, produces a chemical known
to the State of California to cause cancer and birth defects or other reproductive
harm.
(California Health & Safety Code § 25249.5, et seq.)
WARNING:13. People with pacemakers should consult their physician(s) before using
this product. Electromagnetic elds in close proximity to a heart pacemaker could
cause interference to or failure of the pacemaker.
14. Risk of Explosion!
If you detect gas, do not adjust any switches. Do not disconnect the
charging clamps. Immediately ventilate the room by opening windows and
doors. Do not switch on an electrical fan. When the air has cleared of gas,
unplug the unit from the electrical outlet.
Charge the battery in a well-ventilated area.
To prevent sparking due to electrostatic discharge, never wear clothes made of
synthetic materials when charging the battery.
Avoid creating or working around any ames or sparks; ames or sparks can
ignite the gasses caused by charging and cause an explosion.
UNPACKING
When unpacking, check to make sure that the item is intact and undamaged. If any
parts are missing or broken, please call Harbor Freight Tools at the number on the cover
of this manual as soon as possible.