Filter
Top Products
Page 6 For technical questions, please call 1-800-444-3353. SKU 67031
SPECIFICATIONS
Electrical Input 120 V~ / 60 Hz
Electrical Output 22 VDC / 500 mA
Charge Time 3-5 hours
Charging
Capability
67029 - 18 V, 1.3 A, NiCd
Battery Pack (sold separately)
UNPACKING
When unpacking, make sure that
the item is intact and undamaged. If any
parts are missing or broken, please call
Harbor Freight Tools at 1-800-444-3353 as
soon as possible.
OPERATING INSTRUCTIONS
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
Place the Battery Pack on a dry 1.
reproof surface in a room where the
temperature is from 50–104° F.
Allow the Battery Pack to cool 2.
completely before charging.
Make sure the battery pack is
undamaged; do not charge a
cracked or leaking battery pack.
Disconnect the Cord from the 3.
Charger. Attach the plug to a
grounded, 120 V~, 60 Hz outlet.
Charger
Battery
Pack
Figure 4A
Power
Indicator
Alignment
Tab
Figure 4B
4. Slide the Charger onto the Battery
Pack until it rmly rests in place
against the alignment tab (see
Figures 4A and 4B). If the Charger
does not t properly, disconnect it
and conrm that the Battery Pack is
the correct model for this Charger as
shown on the Specication chart.
Do not charge any Battery Pack not
listed or any Battery Pack that the
Charger does not securely t.
Attach the Cord to the Charger. The 5.
Power Indicator will light to show that
the power is connected.
For a fully discharged battery or a 6.
new battery, allow the Battery Pack to
Charge for at least 3 hours.
Do not charge the Battery Pack
longer than 5 hours.
WARNING! TIME the charging cycle.
The battery charger will not signal
when charging is nished.
Unplug the Charger and disconnect it 7.
from the Battery Pack when nished.
Allow the Battery Pack to cool 8.
completely before using it.
Store the Charger and Battery Pack 9.
indoors, out of reach of children.
REV 09h