Harbor Freight Tools 67803 Laser Level User Manual


 
Page 2 For technical questions, please call 1‑800‑444‑3353. SKU 67803
6. Position batteries in proper polarity
and do not install batteries of
different types, charge levels,
or capacities together.
7. People with pacemakers should
consult their physician(s)
before use. Electromagnetic
elds in close proximity to heart
pacemaker could cause pacemaker
interference or pacemaker failure.
Instructions
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section
at the beginning of this
document before set up
or use of this product.
Figure A: Controls
Power Buttons Bulls‑eye
Level
Laser
Openings
1. The Power Buttons (see Figure A)
allow each of the two
lasers to be switched on
independently from one another.
Point the Laser Openings away
from your eyes before turning on.
Turn off both lasers after use for
safety and to extend battery life.
2. The Bulls‑eye Level (see Figure A)
can be used to determine if the
surface the level is mounted on
is level. If the bubble is centered
in the circle, the surface is level.
3. The Magnets (see Figure B) are
used to mount the level to a ferrous
(iron‑containing) metal surface.
Battery Replacement
Before rst use or if laser appears
dim, then replace the batteries:
Figure B: Battery Compartment
Battery Cover
Magnets
1. Open the Battery Cover.
2. Remove the old Batteries.
Dispose of them properly or
recharge if rechargeable.
3. Install three ‘AA’ batteries.
Position batteries in proper polarity
and do not install batteries of
different types, charge levels,
or capacities together.
4. Close the Battery Cover.
Record Serial Number Here:
Note: If product has no serial
number, record month and
year of purchase instead.
Note: Replacement parts are
not available for this item.