Filter
Top Products
Page 9SKU 00086 For technical questions, please call 1-800-444-3353.
Cleaning:
Step 1. Depressurize the cup and disconnect the air hose.
Step 2. Remove the Paint Gun from the CUP as described in OPERATION.
Step 3. Empty the paint or coating from the CUP. Dispose of properly.
Step 4. Pour a small amount of clean solvent (as specied by the paint manufacturer) in the
CUP. See Safety Warnings and Cautions.
Step 5. Place the Paint Gun into the CUP and tighten the LEVER until the assembly is sealed.
Step 6. Reconnect the air hose and pressurize the cup.
Step 7. Clean the Touch-Up Gun by shaking it vigorously and spraying the solvent through the
gun.
Step 8. Repeat steps 1 through 7 until the
sprayed solvent appears clean and
clear.
Step 9. Disconnect the gun from the air supply.
Step 10. Remove the Paint Gun Assembly from
the Cup Assembly and dispose of the
surplus solvent.
Step 11. Wipe the Cup clean with a dry, lint-free
cloth.
WARNING:Always dispose of paints, coating and other chemicals in a proper way. If you have
questions regarding the proper disposal of any chemical, contact the chemical manufacturer for
instructions.
CAUTION:For thorough cleaning, the CUP
may be fully immersed in solvent. DO NOT
LEAVE CUP IN SOLVENT FOR MORE
THAN 24 HOURS as damage may occur.
NEVER IMMERSE THE TOUCH-UP GUN
IN SOLVENT. When cleaning, brush solvent
onto exterior parts only.