Harbor Freight Tools 90985 Paint Sprayer User Manual


 
Page 4
SKU 90985
22. Clean Sprayer with care. Use non-flammable solvents.
23. Do not smoke while spraying. Most solvents and coatings are highly flammable,
particularly when sprayed.
24. Read all of the information concerning coating products and cleaning solvents.
Chlorinated solvents (e.g. 1-1-1 Trichlorethylene and Methylene Chloride, also known
as methyl chloride) can chemically react with aluminum and may explode. Many paint
sprayers contain aluminum. If you have any doubt about potential chemical reactions,
contact the solvent or coating manufacturer.
25. Materials used when painting or cleaning may be harmful or fatal if inhaled or
swallowed. Only use in an area with adequate ventilation. Use a respirator or mask
when painting or using cleaning solvents.
26. Never release the sprayer lid while the cup is pressurized.
27. Never point a spray gun at a person or animal. Always properly mask all objects
that are not to be painted.
NOTE: Performance of the compressor (if powered by line voltage)
may vary depending on variations in local line voltage.
Extension cord usage may also affect tool performance.
WARNING: The warnings, cautions, and instructions discussed in this
instruction manual cannot cover all possible conditions and
situations that may occur. It must be understood by the
operator that common sense and caution are factors which
cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, check to make sure the parts listed on pages 10, 11, and 12 are included.
If any parts are missing or broken, please call Harbor Freight Tools at the number on the
cover of this manual as soon as possible.
WARNING: The brass components of this product contain lead, a chemical
known to the State of California to cause birth defects (or
other reproductive harm). (California Health & Safety code
25249.5, et seq.)