Filter
Top Products
on their own. Do not press against the Knives to stop them. Always keep hands
and fingers clear of spinning Blades.
23. Do not force the Blades into the workpiece being cut. Apply moderate pres-
sure, allowing the Blades to cut without being forced.
24. Never attempt to remove material stuck in the moving parts of the Planer
while it is plugged in and running.
25. Whenever possible, use clamps, a vise, or other safe, practical ways to
hold and support the workpiece.
28. Replacement parts and accessories: When servicing, use only identical re-
placement parts. Only use accessories intended for use with this product.
29. Use the right tool or attachment for the right job. Do not attempt to force a
small tool or attachment to do the work of a larger industrial tool or attachment.
There are certain applications for which this product was designed. It will do the
job better and more safely at the rate for which it was intended. Do not modify
this product, and do not use this product for a purpose for which it was not in-
tended.
30. WARNING! People with pacemakers should consult their physician(s)
before using this product. Operation of electrical equipment in close proximity to
a heart pacemaker could cause interference or failure of the pacemaker.
WARNING! Some dust created by power sanding, planing, sawing, grind-
ing, drilling, and other construction activities contain chemicals known (to the
State of California) to cause cancer, birth defects, or other reproductive harm.
Some examples of these chemicals are; lead from lead-based paints, crystalline
silica from bricks and cement or other masonry products, and arsenic and chro-
mium from chemically treated lumber. Your risks from these exposures varies,
depending on how often you do this type of work. To reduce your exposure to
these chemicals, work in a well ventilated area, and work with approved safety
equipment, such as those dust masks and respirators that are specially designed
to filter out microscopic particles.
(California Health & Safety Code 25249.5, et seq.)
31. WARNING! The warnings, precautions, and instructions discussed in this
SKU 91062 PAGE 10
26. Always grip a power tool firmly with both hands when using.
27. Always disconnect the tool from its electric outlet before performing any
services or maintenance such as leaving the work area, moving the tool from
one location to another, cleaning wood chips and sawdust from the unit, etc.