Harbor Freight Tools 92188 Cordless Drill User Manual


  Open as PDF
of 4
 
ITEM 92188 Angle Drill
With Keyless Chuck
Operating Instructions
3491 Mission Oaks Blvd., Camarillo, CA 93011
'LVWULEXWHGH[FOXVLYHO\E\
+DUERU)UHLJKW7RROV
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to reduce the risk of
personal injury and damage to equipment.
Read all instructions before using this product!
Do not exceed 6,000 RPM maximum speed.1.
Avoid working alone2. . If an accident happens, an assistant can bring help.
Keep work area clean3. . Cluttered areas invite injuries.
Keep children away4. . Children must never be allowed in the work area. Do not let them handle ma-
chines, tools, or extension cords.
Copyright
©
2004 by Harbor Freight Tools
®
. All rights reserved. No portion
of this manual or any artwork contained herein may be reproduced in any shape
or form without the express written consent of Harbor Freight Tools.
For technical questions and replacement parts, please call 1-800-444-3353.
Thank you for choosing a Harbor Freight Tools product! For future reference, please com-
plete the owner’s record below:
Model:___________________ Purchase Date:__________________
Save the receipt, and these instructions. It is important that you read the entire instruction
sheet to become familiar with this product before you begin using it.
Technical Specications:
Angle Drill includes 3/8” Shaft Attachment
Hex Shaft Size: 5/16”
Spindle Thread: 3/8” - 24
Maximum Speed: 6000 RPM
REV 09b
next