Harbor Freight Tools 92188 Cordless Drill User Manual


  Open as PDF
of 4
 
SKU 92188 For technical questions, please call 1-800-444-3353. Page 2
Store idle equipment5. . When not in use, tools must be stored in a dry location to inhibit rust. Always
lock up tools and keep out of reach of children.
Dress properly6. . Do not wear loose clothing or jewelry as they can be caught in moving parts. Protec-
tive, electrically nonconductive clothes and nonskid footwear are recommended when working. Wear
restrictive hair covering to contain long hair.
Use eye and ear protection7. . Always wear ANSI approved impact safety goggles.
Do not overreach8. . Keep proper footing and balance at all times.
Use the right tool for the job9. . Do not attempt to force a small tool or attachment to do the work of a
larger industrial tool. There are certain applications for which this tool was designed. Do not modify this
tool and do not use this tool for a purpose for which it was not intended.
Stay alert10. . Watch what you are doing, use common sense. Do not operate any tool when you are tired.
Check for damaged parts11. . Before using any tool, any part that appears damaged should be carefully
checked to determine that it will operate properly and perform its intended function. Check for alignment
and binding of moving parts; any broken parts or mounting xtures; and any other condition that may
affect proper operation. Any part that is damaged should be properly repaired or replaced by a qualied
technician. Do not use the tool if any switch does not turn On and Off properly.
Replacement parts and accessories12. . When servicing, use only identical replacement parts. Use of
any other parts will void the warranty.
Do not operate tool if under the inuence of alcohol or drugs13. . Read warning labels on prescriptions
to determine if your judgment or reexes are impaired while taking drugs. If there is any doubt, do not
operate the tool.
Use proper size and type extension cord14. . If an extension cord is required, it must be of the proper size
and type to supply the correct current to the tool without heating up. Otherwise, the extension cord could
melt and catch re, or cause electrical damage to the tool. This tool requires use of an extension cord of
0 to 10 amps capability (up to 50 feet), with wire size rated at 18 AWG. Longer extension cords require
larger size wire. If you are using the tool outdoors, use an extension cord rated for outdoor use (signied
by “WA” on the jacket).
Take caution as some woods contain preservatives such as copper chromium arsenate (CCA) 15.
which can be toxic. When drilling these materials extra care should be taken to avoid inhalation and
minimize skin contact.
Maintenance16. . For your safety, maintenance should be performed regularly by a qualied technician.
Read and understand all warnings and instructions provided in the instruction manual of the drill 17.
being used to power this Angle Drill attachment.
Warning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover
all possible conditions and situations that may occur. It must be understood by the operator that com-
mon sense and caution are factors which cannot be built into this product, but must be supplied by the
operator.
Unpacking
When unpacking, verify against the Parts List and Parts Diagram on the next page, that all parts are
included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of
this manual.
Safety Warnings and Precautions (continued)
 previous next