Filter
Top Products
SKU 92798 For technical questions, please call 1-800-444-3353. Page 9
SYMBOLOGY
Double Insulated
Canadian Standards
Association
Underwriters
Laboratories, Inc.
Volts Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
xxxx/min.
A
V ~
no
FIGURE C
PRODUCT FEATURES
NOTE: For additional information regarding the parts listed in the following pages, refer
to the Assembly Diagram on page 13.
1. WARNING! Always make sure the Trigger (36) of the Impact Wrench is in
its “OFF” position, the Battery (37) is removed from the Impact Wrench, and the
Charger (39) is unplugged from its electrical outlet prior to making any adjust-
ments to the tool. (See Figure D, next page.)
2. Trigger (36): The Trigger is operated
manually
simply by squeezing the Trigger to
turn on the Impact Wrench and releasing pressure on the Trigger to turn off the
Impact Wrench. (See Figure D.)
3. Forward/Reverse Switch (32): The Forward/Reverse Switch allows you to change
the rotational direction of the Impact Wrench. For a clockwise rotation, move the
Forward/Reverse Button to the
right
. For a counterclockwise rotation, move the
Forward/Reverse Button to the
left
. To avoid damage to the Impact Wrench,
always wait until the tool completely stops before changing rotational directions.
(See Figure D.)
4. 1/2” Drive Impact Head (7): The 1/2” Impact Head features a spring and ball to
securely hold a socket. The Impact Head accepts all sizes of standard and metric
sockets having a 1/2” drive. (See Figure D.)
REV 03/05