Filter
Top Products
SKU 93821 For technical questions, please call 1-800-444-3353 PAGE 7
6. If necessary, use a torque wrench (not included) to verify the desired torque of
a bolt/nut. If a bolt/nut requires a higher torque level than that produced by the
Ratchet Wrench at 90 PSI, an alternate means (other than the Ratchet Wrench)
of achieving the desired torque should be used.
7. When finished, release the Throttle Lever (11) to stop the Ratchet Wrench.
(See Figure C.)
8. Turn off the air compressor. Disconnect the Ratchet Wrench from its air supply
hose, and remove the socket from the tool.
9. Make sure to store the Ratchet Wrench in a dry, clean, location out of reach of
children and other unauthorized users.
INSPECTION, MAINTENANCE, AND CLEANING
1. WARNING! Always make sure the Throttle Lever (11) is in its “OFF”
position, and disconnect the Ratchet Wrench from its compressed air supply
before performing any inspection, adjustments, maintenance, or cleaning.
2. Before each use, inspect the general condition of the Ratchet Wrench. Check
for loose screws, misalignment or binding of moving parts, cracked or broken
parts, damaged air hoses, and any other condition that may affect its safe
operation. If abnormal noise or vibration occurs, have the problem corrected
before further use. Do not use damaged equipment.