Harbor Freight Tools 93830 Cordless Saw User Manual


 
SKU 93830 For technical questions, please call 1-800-444-3353. Page 9
Specific Safety Rules
1. Maintain a safe working environment. Make sure there is adequate surrounding
workspace. Always keep the work area free of obstructions, grease, oil, trash, and
other debris.
2. Maintain labels and nameplates on this item. These carry important information.
If unreadable or missing, contact Harbor Freight Tools for a replacement.
3. When using a handheld power tool, always maintain a firm grip on the tool
with both hands.
4. To avoid electrical shock, do not pull or carry the AC Charger Adapter (53) by
its Power Cord or pull the Power Cord around sharp corners or edges. Do not
unplug the AC Charger Adapter by pulling on the Power Cord. Keep the Power
Cord away from heated surfaces.
5. Never leave the AC Charger Adapter (53) unattended when it is plugged in.
Make sure to unplug the AC Charger Adapter from its outlet before leaving.
6. Proper Battery Care: Battery (47) leakage may occur under extreme usage or
temperature conditions. If Battery fluid comes in contact with skin, wash with soap
and water and rinse with lemon juice and vinegar. If the fluid comes in contact with
eyes, flush with water for several minutes and contact a doctor immediately. Never
burn the Battery, as it can explode in a fire. Do not attempt to charge a leaking
Battery. Contact local solid waste authorities for instructions on correct disposal or
recycling of the Battery.
7. Store idle equipment. When not in use, tools and equipment should be stored in a
dry location to inhibit rust. Always lock up tools and equipment, and keep out of
reach of children.
8. Industrial applications must follow OSHA requirements.
9. WARNING! Some dust created by power sanding, sawing, grinding, drilling,
and other construction activities, contain chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive harm. Some examples of these
chemicals are: lead from lead-based paints, crystalline silica from bricks and cement
or other masonry products, arsenic and chromium from chemically treated lumber.
Your risk from these exposures varies, depending on how often you do this type of
work. To reduce your exposure to these chemicals: work in a well ventilated area,
and work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles. (California Health & Safety Code §
25249.5,
et seq.
)
10. WARNING! People with pacemakers should consult their physician(s) before
using this product. Electromagnetic fields in close proximity to a heart pacemaker
could cause interference to or failure of the pacemaker.
11. WARNING! The warnings, precautions, and instructions discussed in this manual
cannot cover all possible conditions and situations that may occur. The operator
must understand that common sense and caution are factors which cannot be built
into this product, but must be supplied by the operator.