Filter
Top Products
For technical questions, please call 1-800-444-3353;
Troubleshooting section at end of manual.
SKU 94572 Page 3
Specifications
Safety Warnings and Precautions
WARNING: When using tool, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this tool!
1. Keep work area clean. Cluttered areas invite injuries.
2. Observe work area conditions. Do not use machines or power tools in damp or wet
locations. Don’t expose to rain. Keep work area well lit. Do not use air tools in the
presence of flammable gases or liquids.
3. Keep children away. Children must never be allowed in the work area. Do not let
them handle machines, tools, extension cords, or air hoses.
4. Store idle equipment. When not in use, tools must be stored in a dry location to inhibit
rust. Always lock up tools and keep out of reach of children.
5. Use the right tool for the job. Do not attempt to force a small tool or attachment to do
the work of a larger industrial tool. There are certain applications for which this tool
was designed. It will do the job better and more safely at the rate for which it was
intended. Do not modify this tool and do not use this tool for a purpose for which it was
not intended.
Inlet PSI Range 25 to 32 PSI, 32 PSI Max.
Air Consumption 5 SCFM @ 30 PSI
Paint Capacity 4.2 oz. (125 cc)
Air Inlet 1/4” - 18 NPS
Nozzle Size 0.039 inches (1mm)
Feed Type Gravity feed
Inlet PSI Range 30 to 35 PSI, 35 PSI Max.
Air Consumption 9 SCFM @ 35 PSI
Paint Capacity 20 oz. (500 cc)
Air Inlet 1/4” - 18 NPS
Nozzle Size 0.0551 inch (1.4mm)
Feed Type Gravity feed
You will need the manual for the safety warnings and precautions, assembly
instructions, operating and maintenance procedures, parts list and diagram.
Keep your invoice with this manual. Write the invoice number on the inside of
the front cover. Keep the manual and invoice in a safe and dry place for future
reference.
Save This Manual
Large HVLP Spray Gun
Small HVLP Spray Gun