Filter
Top Products
Page 6SKU 94802
For technical questions, please call 1-800-444-3353
Turn the Regulator Knob (45) for more air flow and more power.
Turn the Knob to the right for Forward; turn left for Reverse.
Maintenance
1. Make sure your Impact Wrench is disconnected from the air hose before attempting
any maintenance.
2. Wipe the Impact Wrench down with a lint free cloth after each use.
3. Make sure the Anvil (6) is clear of dirt or debris. If possible, spray it with compressed
air before each use.
4. If you do not use an inline oiler/filter system, lubricate the tool daily by holding it so that
the Air Inlet (31) is facing up. Squeeze the Trigger (20), and place one or two drops of
oil into the Air Inlet (31). Squeezing the Trigger (20) allows the oil to circulate in the
motor.
Regulator
Knob (45)
Trigger (20)
Anvil (6)
Air Inlet
(31)
FIGURE 1
Forward
Reverse
FIGURE 2
Grease Fitting (2)