Filter
Top Products
13. Tool service must be performed only by qualified repair personnel. Service
or maintenance performed by unqualified personnel could result in a risk of injury.
14. When servicing a tool, use only identical replacement parts. Follow
instructions in the
“Inspection, Maintenance, And Cleaning”
section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
SERVICE
SPECIFIC SAFETY RULES
1. Maintain labels and nameplates on the Welding Torch Mini-Kit. These carry
important information. If unreadable or missing, contact Harbor Freight Tools for
a replacement.
2. Maintain a safe working environment. Keep the work area well lit. Make sure
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris.
3. Prevent eye injury and burns. Wearing and using personal safety clothing and
safety devices reduce the risk for injury. Wear ANSI approved welding goggles (not
included) featuring at least a number 10 shade lens rating. Leather leggings, fire
resistant shoes or boots should be worn when using this product. Do not wear
pants with cuffs, shirts with open pockets, or any clothing that can catch and hold
molten metal or sparks. Keep clothing free of grease, oil, solvents, or any flammable
substances. Wear dry, insulating gloves and protective clothing. Wear an approved
head covering to protect the head and neck. Use aprons, cape, sleeves, shoulder
covers, and bibs designed and approved for welding and cutting procedures. When
welding or cutting overhead or in confined spaces, wear flame resistant ear plugs or
ear muffs to keep sparks out of ears.
4. Prevent accidental fires. Remove any combustible material from the work area.
When possible, move the work to a location well away from combustible materials.
If relocation is not possible, protect the combustibles with a cover made of fire
resistant material. Remove or make safe all combustible materials for a radius of 35
feet (10 meters) around the work area. Use a fire resistant material to cover or
block all open doorways, windows, cracks, and other openings. Enclose the work
area with portable fire resistant screens. Protect combustible walls, ceilings, floors,
etc., from sparks and heat with fire resistant covers. If working on a metal wall,
ceiling, etc., prevent ignition of combustibles on the other side by moving the
combustibles to a safe location. If relocation of combustibles is not possible, designate
someone to serve as a fire watch, equipped with a fire extinguisher, during the
welding process and for at least one half hour after the welding is completed. Do
not weld or cut on materials having a combustible coating or combustible internal
SKU 95671 For technical questions, please call 1-800-444-3353 PAGE 4