Filter
Top Products
SKU 98233 For technical questions, please call 1-800-444-3353. Page 15
MAINTENANCE AND
SERVICING
Procedures not specically
explained in this manual
must be performed only by a
qualied technician.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
performing any inspection,
maintenance, or cleaning
procedures.
TO PREVENT SERIOUS
INJURY FROM TOOL
FAILURE:
Do not use damaged
equipment. If abnormal noise
or vibration occurs, have the
problem corrected before
further use.
Cleaning, Maintenance, and
Lubrication
BEFORE EACH USE,1. inspect the
general condition of the tool. Check
for loose screws, misalignment or
binding of moving parts, cracked or
broken parts, damaged electrical wir-
ing, and any other condition that may
affect its safe operation.
AFTER USE,2. clean external surfaces
of the tool with clean cloth.
Periodically clear out the cooling vent 3.
and fan with compressed air.
The Ceramic Nozzle (6A) 4. will occa-
sionally need to be cleaned of spatter
from welding. Clean it with a metal
brush. When the nozzle deteriorates
or can no longer be cleaned, it will
need to be replaced. Unscrew the
nozzle and replace it with a new one.
5. WARNING! If the supply cord of
this power tool is damaged, it must
be replaced only by a qualied
service technician.