Filter
Top Products
Nozzle Shut Off Valve
Refer to Figure 4.
Step1: Get out the
HOSE ADAPTER
(#25), the STEEL
SHUT OFF VALVE
(#18C), a NIPPLE
CONNECTOR (#16),
the GASKET (#26),
the desired size
NOZZLE (#27A-D),
and the NOZZLE CAP
NUT (#28).
Step2: Put the front of the NOZZLE through the NOZZLE CAP NUT.
Step3: Attach the NOZZLE CAP NUT to the NIPPLE CONNECTOR with the GASKET between
the NIPPLE CONNECTOR and the NOZZLE. The flat end of the GASKET should face the
NIPPLE CONNECTOR.
Step4: Attach the other end of the NIPPLE CONNECTOR to one side of the STEEL SHUT OFF
VALVE.
Refer to Figure 3.
Step1: Get out the TANK (#1), the SAND
CONTROL VALVE (#18B), two NIPPLE
CONNECTORS (#16), and the SAND
OUTLET MANIFOLD (#22).
Step2: Attach one of the NIPPLE
CONNECTORS to the bottom of the
TANK (#1).
Step3: Attach the SAND CONTROL VALVE to
the other end of the NIPPLE
CONNECTOR.
Step4: Attach the other NIPPLE CONNECTOR
to the other end of the SAND CONTROL
VALVE.
Step5: Attach the other end of the NIPPLE
CONNECTOR to the side hole of the
SAND OUTLET MANIFOLD.
Tank
(#1)
Nipple
Connector
(#16)
Sand Control
Valve
(#18B)
Sand Outlet
Manifold
(#22)
Hose Adaptor
(#25)
Steel Shut
Off Valve
(#18C)
Nipple
Connector
(#16)
Nozzle
(#27A-D)
Nozzle Cap
Nut
(#28)
Gasket
(#26)
Sand Control Valve
Figure 3 — Sand Control Valve Assembly
Figure 4 — Nozzle Shut Off Valve
Page #7 -- SKU 34202