Filter
Top Products
SPECIFICATIONS
SAVE THIS MANUAL
You will need the manual for the safety warnings and cautions, assembly instructions, operat-
ing procedures, maintenance procedures, trouble shooting, parts list, and diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Keep
both this manual and your invoice in a safe, dry place for future reference.
SAFETY WARNING & CAUTIONS
WARNING: When using electric tools, machines, or equipment, basic safety precautions
should always be followed to reduce the risk of fire, electric shock, and personal injury. READ
ALL INSTRUCTIONS BEFORE USING THIS TOOL!
1. KEEP WORK AREA CLEAN. Cluttered areas invite injuries.
2. OBSERVE WORK AREA CONDITIONS. Do not use machines or power tools in damp,
wet, or poorly lit locations. Don’t expose to rain. Keep work area well lit. Do not use electri-
cally powered tools in the presence of flammable gases or liquids.
3. KEEP CHILDREN AWAY. Children must never be allowed in the work area. Do not let them
handle machines, tools, or extension cords.
4. STORE IDLE EQUIPMENT. When not in use, tools must be locked up in a dry location to
inhibit rust. Always lock up tools and keep out of reach of children.
5. DO NOT FORCE THE TOOL. It will do the job better and more safely at the rate for which it
was intended. Do not use inappropriate attachments in an attempt to exceed the tool’s
capacities.
6. USE THE RIGHT TOOL FOR THE JOB. Do not attempt to force a small tool or attachment
to do the work of a larger industrial tool. Do not use a tool for a purpose for which it was not
intended.
#40132 Page 2
Motor 1 HP, Reversible, Two Pole
Volts 115V/230V
Amps 120V - Start up = 9.20 Amps
No Load = 6.50 Amps
Full Load = 10.6 Amps
230V - Start up = 2.25 Amps
No Load = 1.65 Amps
Full Load = 5.30 Amps
Frequency 60Hz
Shaft Diameter 5/8”
RPM No Load 3450 RPM @ 115 VAC or 3413 RPM @ 230 VAC
Phase Single
Mounting Base Dimensions 6-1/4”Lx3-5/16”W
(4-slotted holes 1-1/4”Lx3/8”W)
Net Weight 23 Lbs.