Filter
Top Products
FEATURES
• Automatically comes on when motion is detected.
• Automatically turns light off.
• Photocell keeps the light off during daylight hours.
598-1286-01
UNPACKING
Be sure to remove all contents from packaging and verify
all items are present before assembling this light fixture.
is package includes the following items:
• Lantern (Includes: Top Cover, Glass Fixture, Fixture
Base)
• Universal mounting bracket (X-Bar)
• Mounting hardware
• Wire nuts
• Owner’s Manual
Before installation, record the model number listed
inside the xture. Attach receipt in case of possible
warranty issues.
Model Number:
REQUIREMENTS
• e Light Control requires 120 volts AC.
• If you want to use Manual Mode, the control must be
wired through a switch.
• Some electrical codes require installation by a qualified
electrician. Please check the codes in your area.
Carriage Light with
Motion-activated
Sensor
LANTERN ASSEMBLY
1. Place glass fixture onto base assembly.
2. Line up the arrow on the bottom of glass fixture
with the arrow on the fixture base (see illustration
below).
Glass Fixture
Arrows
Fixture Base
Glass Fixture
Fixture Base
3. Gently push the two pieces together and rotate the
glass fixture 90° as shown below.
Models 52-4473-6
52-4474-4
Installation and Operating
Instructions