![](http://pdfasset.owneriq.net/f/c7/fc79c5a3-853e-4ca3-9abe-e125c8deb30d/fc79c5a3-853e-4ca3-9abe-e125c8deb30d-bg5.png)
-5-
598-1290-02
Installation
If you want to use the Manual Override feature you will need to install the fixture on a circuit controlled
by a switch.
❒ Loosen the thumbscrews holding the sensor
head and lampheads.
❒ Adjust the various parts so that the fixture
looks similar to this illustration.
❒ Finger tighten the thumbscrews at this time.
Wall Mount
Eave Mount
❒ Loosen the thumbscrews holding the sensor
head and lampheads.
❒ Adjust the various parts so that the fixture
looks similar to this illustration.
❒ Finger tighten the thumbscrews at this time.
Caution: before starting the installation, turn the power off at the
CirCuit breaker.