I.C.T.C. Holdings Corporation 10-55-013-2 300 series Paint Sprayer User Manual


 
"Rental proven, rental
tough" - Many
Hydrapulse
TM
units 15,
20, 25 years old and
still in service
Hydrapulse
TM
airless
means less costly
repairs since the piston
works in hydraulic oil
and not in the paint.
Repairs are easier and
less costly since two
inexpensive check balls
take most of the wear.
Industrial duty, fan
cooled, fully enclosed
AC electric motor -
"In this case bigger
is better"
No electronics to fail,
hydraulic pressure
control provides even
spray pattern
Zinc plated intake
siphon tube
Simple to operate and
extremely easy to
maintain
Pneumatic tires on
steel rims
Belt drive pump system
reduces pump speed
resulting in less wear,
longer pump life, and
lower amp draw
New improved heavy
duty T-handle prime
valve offers better
priming performance
and longer life
Lifetime warranty on
Hydrapulse
TM
membrane
Lifetime warranty on
powder coated steel
and chrome frame
Hydrapulse
TM
- Siphon Feed Units
Models 85SE/SEL, 330SE/SEL, 350SE, 300GSD, 1140GSD, & 300S/SL Legend
When reliability, durability and cost are important
choose "HYDRAPULSE
TM
" No other airless unit on the market compares
330SEL
350SE
350SE
85SEL
Hydrapulse
TM
Membrane
300SL
LEGEND
Model Maximum Output Maximum Tip Size Maximum Pressure Motor/ Engine Size
85SE/SEL .5 GPM .019 2500 PSI .75 HP Electric
330SES/SEL .65 GPM .023 3000 PSI 1.0 HP Electric
350SE .86 GPM .028 (2 Guns .018) 3000 PSI 1.5 HP Electric
300GSD .60 GPM .024 3000 PSI 3 hp Honda
TM
Gas GX
1140GSD 1.0 GPM .031 (2 Guns .021) 3000 PSI 4 hp Honda
TM
Gas GX
300S/SL LEGEND .60 GPM .023 3000 PSI 1.0 HP Electric
Flow rate established with water at 2,000 PSI (138 bar) at the tip.
Models and specifications subject to change without notice
1140GSD
300GSD