Filter
Top Products
Effective 2008 To Order, Call Toll-Free 1-800-BUEHLER (1-800-283-4537) 17
Abrasive Belt Grinders
SurfMet® 1 Belt Surfacer with Sink is a durable single station coarse grinder that is ideal for
metallographic,spectrographic and macrohardness test specimen preparation.Complete with
belt cooling,debris flushing system and rinse sink.The heavy-duty motor offers superior
durability and performace.Separate belt flushing and coolant controls guarantee ample
removal of particulate matter from the grinding belt,providing efficient cutting action and
critical specimen cooling.The stainless steel sink with faucet allows the convenienve of quickly
grinding and washing the specimen in one location. Includes a selection of CarbiMet® Abrasive
Belts and operating instructions.
16-1270-160 SurfMet® 1 Belt Surfacer, 115 VAC, 60 Hz,1 phase
16-1270-250 SurfMet® 1 Belt Surfacer, 220 VAC, 50 Hz,1 phase
SurfMet® 1 Belt Surfacer
Accessories
10-1250* Recirculating System
16-1278 Wear Plate Retrofit Kit for Belt Grinders
16-1279 Copper Wear Plate Retrofit Kit,useful for dry grinding
for increased heat transfer
16-1497 Recirculating System Cart
16-1498 TechMet® Cabinet,30″ (762mm)
16-1499 TechMet® Cabinet,36″ (914mm)
16-3100* VacuMet
®
Dust Removal System
16-3105 Collector Bags,Replacement for VacuMet®
16-3170 Hose and Connector Assembly SurfMet® I & II
10-4330-095 CoolMet® 2 Fluid, 33.8oz (1l)
10-4330-128 CoolMet® 2 Fluid, 1 Gallon (3.8l)
10-4330-640 CoolMet® 2 Fluid, 5 Gallon (19l)
16-5200-080-010 CarbiMet® MetSplice® Abrasive Belts,4″ x 36″
(10.2cm x 91.4xm) / wet or dry use,package of 10,80 (P80) grit
16-5200-120-010 CarbiMet® MetSplice® Abrasive Belts,4″ x 36″
(10.2cm x 91.4xm) / wet or dry use,package of 10,120 (P120) grit
16-5200-180-010 CarbiMet® MetSplice® Abrasive Belts,4″ x 36″
(10.2cm x 91.4xm) / wet or dry use,package of 10,180 (P180) grit
16-5200-240-010 CarbiMet® MetSplice® Abrasive Belts,4″ x 36″
(10.2cm x 91.4xm) / wet or dry use,package of 10,240 (P280) grit
DuoMet® 2 is a durable dual station coarse grinding unit that prepares specimens fast and
efficiently.Two belts of different grit sizes added for convenience.Complete with belt cooling,
debris flushing system and rinse sink.The stainless steel sink with faucet allows the convenienve
of quickly grinding and washing the specimen in one location. Includes a selection of
CarbiMet® Abrasive Belts and operating instructions.
16-1290* DuoMet® 2 Belt Surfacer
16-1295* DuoMet® 2 Belt Surfacer,Floor Model
DuoMet® 2 Belt Surfacer
39-1572 HandiMet® 2 Roll Grinder offers the user an exceptionally convenient and
economical instrument for manual grinding applications.The HandiMet® 2 provides a self
contained four-stage grinding station with controlled water flow for lubrication and cooling of
the specimen plus the flushing away of debris.Unique water activated clamping holds abrasive
papers firmly in position during grinding.Includes a selection of four abrasive paper rolls, water
hoses and operating instructions.
HandiMet® 2 Roll Grinder
* Specify Voltage & Frequency Required -160:115 VAC,60 Hz,1 phase -230:220 VAC,50 Hz,1 phase
Grinding/Polishing
Accessories
30-5143-240-001 240 grit CarbiMet® Abrasive Paper Roll
30-5143-320-001 320 grit CarbiMet® Abrasive Paper Roll
30-5143-400-001 400 grit CarbiMet® Abrasive Paper Roll
30-5143-600-001 600 grit CarbiMet® Abrasive Paper Roll