Filter
Top Products
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
Warning:
caustic
substances
Obligation signs
Weareye
protection
Weara hard
hat
Wearear
protection
Wear
protective
gloves
Wear
breathing
protection
Symbols
Readthe
operating
instructions
beforeuse
Returnwaste
materialfor
recycling.
Volts Directcurrent
Ratedspeed
underno load
Revolutions
perminute
Diameter Sawblade
1 These numbersrefer to thecorresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation “the
power tool” always refers to the WSC 70ತA36 or
WSC 55ತA24 cordless circular saw.
Location of identification data on the power tool
The type designation can be found on the type iden-
tification plate and the serial number on the side of
the motor housing. Make a note of this data in your
operating instructions and always refer to it when
making an enquiry to your Hilti representative or
service department.
Type:
Serial no.:
2. Description
2.1 Use of the product as directed
The power tool is a hand-held, cordless circular saw.
The power tool is designed for sawing wood or wood-like materials, plastics, drywall panel (plasterboard),
gypsum fiberboard and composite materials with a thickness of up to 55 or 70 mm (depending on model) and
for bevel cuts at angles between 0 ° and 50 °.
Working on materials hazardous to the health (e.g. asbestos) is not permissible.
The power tool is designed for professional use and may be operated, serviced and maintained only by trained,
authorized personnel. This personnel must be informed of any special hazards that may be encountered. The
power tool and its ancillary equipment may present hazards when used incorrectly by untrained personnel or
when used not as directed.
The working environment may be as follows: construction site, workshop, renovation, conversion or new
construction.
Modification of the power tool is not permissible.
en
18