Filter
Top Products
English
15
CAUTION:
Do not look directly into the light.
Such actions could result in eye injury.
(4) Replacing the batteries
(a) Loosen the hook screw with a phillips-head
screwdriver (No. 1). (Fig. 15)
Remove the hook cover by pushing in the
direction of the arrow. (Fig. 16)
(b) Remove the old batteries and insert the new
batteries. Align with the hook indications and
position the plus (+) and minus (–) terminals
correctly. (Fig. 17)
(c) Align the indentation in the hook main body
with the protuberance of the hook cover,
press the hook cover in the direction opposite
to that of the arrow shown in Fig. 16 and then
tighten the screw.
Use commercially available AAAA batteries
(1.5 V).
Fig. 12
Spring
Fig. 13
NOTE:
Pay attention to the spring orientation. Install the
spring with larger diameter away from you. (Fig.
13)
(3) Using as an auxiliary light
(a) Press the switch to turn off the light.
If forgotten, the light will turn off automatically
after 15 minutes.
(b) The direction of the light can be adjusted within
the range of hook positions 1 - 5. (Fig. 14)
⅜
Lighting time
AAAA manganese batteries: approx. 15 hrs.
AAAA alkali batteries: approx. 30 hrs.
Fig. 11
Larger diameter
faces away
Fig. 14
Switch
Fig. 15
Hook
Screw
Phillips-head
screwdriver
01Eng_DH18DL_US 12/12/07, 19:0015