Filter
Top Products
English
7
SPECIFICATIONS
Voltage 230V
Power Input 800 W
No-load speed 0 – 1050
min
–1
Full-load impact rate 0 – 4600
min
–1
Capacity: concrete 3.4 – 24 mm
steel 13 mm
wood 32 mm
Weight (without cord and side handle) 2.8 kg
Dust collecting adapter
Max. hole-drilling depth: 100 mm (adjustment possible between 0 and 100 mm)
Diameter of drill: 3.4 – 24 mm
Max. length of drill (overall length): 270 mm
Dustbag capacity: 0.4 liters
PRECAUTIONS ON USING ROTARY HAMMER
1. Wear ear protections
Exposure to noise can cause hearing loss.
2. Do not touch the bit during or immediately after
operation. The bit becomes very hot during
operation and could cause serious burns.
3. Before starting to break, chip or drill into a wall,
floor or ceiling, thoroughly confirm that such items
as electric cables or conduits are not buried inside.
4. Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
5. Always hold the body handle and side handle of
the power tool firmly. Otherwise the counterforce
produced may result in inaccurate and even
dangerous operation.
6. Wear a dust mask
Do not inhale the harmful dusts generated in drilling
or chiseling operation. The dust can endanger the
health of yourself and bystanders.
STANDARD ACCESSORIES
(1) Case (Molded plastic)................................................. 1
(2) Side handle ................................................................. 1
(3) Dust collecting adapter ..............................................1
(4) Dust bag ......................................................................1
[Numbers (3) and (4) refer to use on concrete]
(5) Cap............................................................................... 1
Standard accessories are subject to change without
notice.
OPTIONAL ACCESSORIES (sold separately)
1. Drilling anchor holes (rotation + hammering)
⅜ Drill bit (Slender shaft)
⅜ Drill bit (Taper shank) and taper shank adapter
Drill bit (slender shaft)
Outer diameter Effective length Overall length
3.4 mm
45 mm 90 mm
3.5 mm
Adapter for slender shaft
(SDS-plus shank)
Drill bit (Slender shaft)
Drill bit (Taper shank)
Taper shank adapter
(SDS-plus shank)
Cotter