Filter
Top Products
21
English
Taper mode Code No. Applicable drill bit
7/16" (11 mm)
31/64" (12.3 mm)
303617
1/2" (12.7 mm)
9/16" (14.3 mm)
73/128" (14.5 mm)
11/16" (17.5 mm)
303618 27/32" (21.5 mm)
A-taper 303619
B-taper 303620
External dia. Code No.
7/16"
944460
(11 mm)
31/64"
944461
(12.3 mm)
1/2"
993038
(12.7 mm)
9/16"
944462
(14.3 mm)
73/128"
944500
(14.5 mm)
11/16"
944463
(17.5 mm)
27/32"
944464
(21.5 mm)
Morse taper
(No. 1)
Drill bit
(Taper
shank)
Taper shank adaptor formed A-
taper or B-taper is provided as
an optional accessory, but drill
bit for it is not provided.
Morse taper
(No. 2)
Drill bit
(Taper
shank)
Anchor Setter (for anchor setting)
(SDS-plus shank)
2. Knock-in anchor (Striking only) (DH30PC)
<Outer wedge type with the female screw>
A
nchor size
W 1/4" W 5/16" W 3/8"
(6.3 mm) (8 mm) (9.5 mm)
Overall Length
10-15/64" 10-15/64" 6-19/64" 10-15/64"
(260 mm) (260 mm) (160 mm) (260 mm)
Code No. 302976 302975 303621 302974
<Inner wedge type with the headless screw>
A
nchor size
W 1/4" W 5/16" W 3/8"
(6.3 mm) (8 mm) (9.5 mm)
Overall Length
10-15/64" 10-15/64" 6-19/64" 10-15/64"
(260 mm) (260 mm) (160 mm) (260 mm)
Code No. 302979 302978 303622 302977
Anchor setting adaptor
(for manual hammer)