Filter
Top Products
English
19
ACCESSORIES
WARNING: ALWAYS use Only authorized HITACHI replacement parts and
accessories. NEVER use replacement parts or accessories which are
not intended for use with this tool. Contact HITACHI if you are not sure
whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
NOTE: Accessories are subject to change without any obligation on the part of the HITACHI.
STANDARD ACCESSORIES
(1) Case (Molded plastic) (Code No. 318307)....................................................................... 1
(2) Side Handle (Code No. 980939)....................................................................................... 1
(3) Stopper (Code No. 980906).............................................................................................. 1
(4) Dust Cup (Code No. 971787)............................................................................................ 1
OPTIONAL ACCESSORIES........sold separately
1. Drilling anchor holes (Rotation + Striking)
⅜ Drill Bit (Slender shaft)
(1) Drill Bit (Slender Shaft)
(2) Adaptor for
Slender Shaft
Outer diameter Effective Length Overall Length Code No. Code No.
1/8" 1-25/32" 3-35/64"
306369
(3.4mm) (45mm) (90mm)
306370
9/64" 1-25/32" 3-35/64"
306368
(3.5mm) (45mm) (90mm)
(1) Drill Bit
(Slender Shaft)
(2) Adaptor for slender
shaft (SDS-plus
shank)
e01_dh25pb(02_24)e.p65 2/14/03, 5:02 PM19