Filter
Top Products
15
English
(1) Cold chisel
8. Asphalt cutting (Hammering)
(1) Cutter
9. Digging
(1) Scoop
Code No. 313476
10. Surface Roughing (Hammering)
(1) Bushing Tool
Code No. 313477
2) Shank
11. Tamping (Hammering)
(1) Rammer
Code No. 313478
(2) Shank
12. Syringe (for chip removal)
Code No. 320859
Code No. 318085
13. Hammer grease A
1.1 lbs (500 g) (in a can) Code No. 980927
0.15 lbs (70 g) (in a green tube) Code No. 308471
0.07 lbs (30 g) (in a green tube) Code No. 981840
NOTE:
Specifications are subject to change without any
obligation on the part of the HITACHI.
Overall length Code No.
11" (280 mm) 313473
15-3/4" (400 mm) 313474
Overall length Width Code No.
15-3/4" (400 mm) 1-31/32" (50 mm) 313475
Overall length Code No.
8-21/32" (220 mm) 313479
Overall length Code No.
8-21/32" (220 mm) 313479
01Eng_DH38MS_US 7/14/09, 9:2215