Filter
Top Products
13
English
(1) Switching to “hammering”
(a) Push the button, release lock and turn the
selector lever counterclockwise.
(b) Align ▲ of the selector lever and
of the
lever holder as illustrated in Fig. 7.
(c) Release the button to lock the selector lever.
NOTE:
Turn the selector lever (do not push the button)
to check if it is completely locked and make sure
that it does not turn.
(2) When fixing working positions of tools such as
cold chisel, etc.,
(a) Push the button, release lock and turn the
selector lever.
Align ▲ of the selector lever and
of the
lever holder as illustrated in Fig. 8.
(b) Release the button to lock the selector lever.
(c) Turn the grip as illustrated in Fig. 9 and fix
the tool to the desired working direction.
(d) Switch the selector lever to “hammering”
according to the procedures mentioned in
the above item (1) and secure the position
of the tool.
5. Install the stopper (Fig. 10)
(1) Loosen the side handle and insert the straight
portion of the stopper into the handle bolt hole
from the front cover.
(2) Loosen the side handle, move the stopper to
the specified position and rotate the grip of the
side handle clockwise to fix the stopper.
Fig. 7
Lever Holder
Selector Lever
Fig. 8
Selector Lever
Lever Holder
Grip
Fig. 9
Stopper
Side Handle
Fig. 10
Button
Button
01Eng_DH45MR_US 4/4/06, 10:2313